Code Alarm CA650 User Manual download pdf (Page 20)

7. SYSTEM POWER-UP PROCEDURE

1. After all connnections are complete, turn the vehicle's ignition key to the ON position.

2. Insert both 30 Amp fuses into their respective fuseholders.

3. Turn the ignition key to the OFF position

8. MOUNTING THE MODULE / FINISHING THE INSTALLATION

1. Mount the module to a brace or wire harness under the dash. The module and harnesses must be

clear of moving parts.

2. Completely uncoil the antenna and route up the nearest front window pillar to the headliner. Be

careful not to pinch the antenna under vehicle panels, or route near moving parts.

3. Route the antenna across the headliner to a position behind the rearview mirror.

4. Attach the antenna to the inside of the windshield behind the rearview mirror:

• The glass surface must be clean before mounting antenna. Use rubbing alcohol to thoroughly

clean the mounting location.

• Remove protective backing and press firmly against windshield.

5. Plug antenna into the Reciever Plug located in the back of module. (Black Connector)

Installation Complete.

1 2 ... 15 16 17 18 19 20 21

No comments

Code Alarm CA650 User Manual Page 20