1IMPORTANT NOTE: The operation of the Security and Convenience System as described in thismanual is applicable to most vehicles. However, due to the
10Settings for the 2-Way Transmitter, continued Lighting for 2-Way TransmitterThis setting adjusts the amount of time the 2-way transmitter’s display
11 Count Down TimerThe 2-way transmitter is equipped with a count down timer that will sound an alert once the time reaches 0:00. Toadjust the count d
12 Name of Channel SettingThe 2-way transmitter’s AUX output names can be modified to reflect the accessory in which it controls, such aswindow automa
13 Arming the Security SystemTo arm the system, exit the vehicle, close all doors, then press the LOCK button on the remote control. The systemwill s
14 Attempted Intrusion IdentificationThis system will inform you if an intrusion attempt has occurred while you were away from the vehicle. If anintr
15Using Your Remote Control, continued Activating Optional AUX 1 (Optional)If this feature is enabled on your system, scroll to vehicle menu 3 andpres
16Using Valet Mode Using Valet ModeTo engage valet mode:1. Turn the ignition key to the ON position.2. Press and hold the emergency override butto
17Using Your Remote Vehicle Starter, continued Preheating or Precooling the Vehicle’s interiorBefore exiting the vehicle, set the temperature controls
18Using Your Remote Vehicle Starter, continued Operating the Daily Start TimerThe system has the ability to start your vehicle based on a preset time
19 Page Call OutFrom within the vehicle, press and hold the emergency override button for 4 seconds, the2-way remote control will emit a beep and the
2Table of Contents2-Way Transmitter Main Display Screen ... 42-wa
20 Anti Hi-JackActive Anti Hi-JackWhen Active Anti Hi-Jack is selected it must be activated by the transmitter each time it is needed.1. While the ign
21Quick Reference Operation Guide, continuedRemote control button operation.Transmitter ButtonSystem Function Notes / Button 1Arm/Lock Press and rel
22Replacing Remote Control Batteries 1-way 5 Button Remote Control:The two 3 volt lithium batteries inside the remote control should last approximate
23 Coded Override ProcedureThe system has an optional override mode that allows you to program a 2-digit personal code using the emergencyoverride but
24Code Systems, Inc. Limited Lifetime WarrantyCode Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of thisCODE vehicle security product (the
25
26FCC COMPLIANCEThis device complies with Part 15 of the FCC rules and with RSS-210 of IndustryCanada. Operation is subject to the following two condi
3Table of Contents, continuedUsing Your Remote Control, continued ...
42-Way Transmitter Main Display Screen2-Way Transmitter Button Descriptions / LocationsOLED MAIN DISPLAY SCREEN Battery Level Car Jacking In Range I
5Charging the BatteryYour 2-way transmitter is powered by a built-in 3.7V lithium polymer battery. When the screen displays low battery orthe icon
6When the remote start “ ” icon is flashing press the “ ” icon button to display the remote start status.When the count down timer “ ” icon is flashin
7Vehicle Menu Options on the 2-Way TransmitterThe 2-way transmitter allows multiple operations from the main four buttons by scrolling through the men
8Settings for the 2-Way Transmitter Button BeepsThe 2-way transmitter buttons will respond with a short “beep” sound when pressed. To turn this featur
9Settings for the 2-Way Transmitter, continued Power Save ModeWhile in power save mode the 2-way transmitter will not attempt to communicate with the
Comments to this Manuals