Code Alarm CA-125 Owner's Manual download pdf (Page 4)

Using Your Remote Transmitter

Two Stage Door Unlock

If this feature is enabled on your system, pressing the UNLOCK icon button one time on the transmitter

will unlock only the driver’s door. Press disarm again within 15 seconds to unlock the remaining

doors.

Activating the Trunk Release Feature

If this feature is enabled on your system, pressing and holding the TRUNK icon button on the

transmitter for 2 seconds will open the vehicles trunk or hatch.

Turning on the Vehicle’s Headlights

If this feature is enabled on your system, pressing and holding the LOCK icon button on the transmitter

for 2 seconds will turn on the vehicle’s headlights for 20 seconds.

Using the Progressive Car Finder Feature

Press the icon button on the transmitter to locate your vehicle. The horn will honk 5 times at low

volume increasing in volume each of 3 times the button is pressed.

Using the Personal Protection Alarm (Panic)

Press and hold the icon button on the transmitter for 3 seconds to activate the personal protection

alarm. The horn will pulse for 30 seconds. Pressing any button on the transmitter will turn the

personal protection alarm off.

Using the Transmitter Flashlight Feature

The (1) 6 button transmitter included with your system has a flashlight bulb built into the top of the

transmitter. Pressing and holding the LIGHT icon button on the transmitter will activate the flashlight

until the button is released.

Using Valet Mode

To engage valet mode:

1. Turn the ignition key to the ON position.

2. Press and release the emergency override button.

3. The blue dashboard mounted LED will light solid indicating that the system is in

valet mode.

When valet mode is activated the dash mounted status LED will light solid, and all security functions

will be disabled.

To disengage valet Mode:

1. Turn the ignition key to the ON position.

2. Press and release the emergency override button.

3. The blue dashboard mounted LED will turn off indicating that the system has

exited valet mode.

When the valet mode has been deactivated the dash mounted status LED will turn off and all security

functions will be enabled the next time the system is armed.

1 2 3 4 5 6 7 8 9

No comments

Code Alarm CA-125 Owner's Manual Page 4