Code Alarm CATX120 User Manual download pdf

Model CATX120

Programming Guide

The keychain transmitters included with the system have

been pre-programmed at the factory, with each button pre-

assigned to control a specific function of the system.

It is important to remember that during programming, each

individual step of the procedure must be executed within 15

seconds of the previous step.

When the 15 second time limit is allowed to expire, the

system will automatically terminate the programming mode.

This is indicated by a long chirp from the siren.

Additionally, the system will store codes from up to 4

different transmitters. If a 5

transmitter is programmed to

any receiver channel, then the first transmitterprogrammed

to that channel will be erased from the system’s memory.

To program new or additional transmitters, the alarm must

be disarmed and the valet switch

must be in the OFF

position:

1. Enter the vehicle, and turn the ignition key to the ON

position.

2. Press and release the valet/programming/override

switch 3 times.

3. The dash LED will flash one time, and the sounding

device will beep one time, indication the system is ready to

accept programming for transmitter 1.

4. Press and hold the Arm Icon button until the sounding

device emits a long beep, indicating the signal has been

stored into memory.

5. If you have additional transmitters (up to 4) that need to

be programmed, repeat step 4 for each transmitter.

1 2

Model CATX120 1

Summary of Contents

Page 1 - Model CATX120

Model CATX120Programming GuideThe keychain transmitters included with the system havebeen pre-programmed at the factory, with each button pre-assigned

Page 2

Changing the Remote Control BatteryThe 12-volt alkaline battery supplied in your remotetransmitter should last approximately one year, depending onusa

Comments to this Manuals

No comments

Code Alarm CATX120 User Manual

Browse online or download User Manual for Security device components Code Alarm CATX120. Code Alarm CATX120 User's Manual

Summary of Contents

Comments to this Manuals