Code Alarm CA-640 Instruction Manual download pdf (Page 25)

7. Personalized Transmittter’s

A. What is Personalized Transmiiters function

This system has the capability to active an auxilary when the unit

recieves an unlock command from the tranmitter. This function

would be used to activate memory seats or any other device that

you wanted activatedwhen unlocked . Option bank 2/Feature 2

(Pg.19) turn festure to the on position (LED ON)

Once the option is selected you MUST re-program the

transmitters

C. Remote Transmitter Programming - Personalized Transmitters

1. Open the driver’s door.

1.a. The 20/B wire must initially see a ground to access

programming.

2. Turn vehicle ignition on.

3. Press and hold emergency override button.

After 10 seconds, the siren or horn will sound three (3) times. This

indicates that the unit has entered the transmitter programming mode.

4. Program as many transmitters (up to 8) as desired . The last 2

transmitters that are learned will activate the auxialries when

unlocked.

B. How does it work?

With option selected the last 2 transmitters that are learned into

the sytem will act as transmitter for Driver 1 and Driver 2.

i.e program 3 tranmsitters into system.The 2nd from last transmitter

will activate aux4. The last transmitter learned will activate aux 3

IMPORTANT!

In order for this function to work properly the Neutral safty must be

installed correctly

Turbo Timer is a selectable option that will allow vehicle to remain

running after the consumer has exited for 5 Minutes.

To achieve this feature you must have the option selected and a

tach programmed (unless tachless is selected)

How to activate Turbo Timer

8. Turbo Timer Option

1. The option must be selected & Car Start harness must be

installed

2.The module must see neutral safty change state from Drive to

park.

3.Push and hold brake for 5 seconds

4.Turbo Timer will activate and run for 5 minutes

CA-640.p65 10/20/03, 7:48 PM25

1 2 ... 20 21 22 23 24 25 26 27

No comments

Code Alarm CA-640 Instruction Manual Page 25