Code Alarm ca5153 Installation Guide Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 42
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
16
Set
Up
&
Programming
Transmitter Programming - Feature Bank 1
1.
Turn the ignition
ON.
2.
Press and hold the valet/override button.
3.
Within 1 0
seconds the system
will
chirp (3) three times.
4.
Press 1 button of each transmitter you wish to program.
5.
The system
will respond with 1 chirp for each accepted transmitter.
6.
Pressing the override button at anytime during programming
will advance to
the next bank.
NOTE:
The system
will exit transmitter programming after 15 seconds of inactivity.
NOTE:
This system has 1 button programming which programs
all
channels of the
system.
NOTE:
The system
will hold
up to 4 transmitters
in
memory, programming a 5th
transmitter
will
erase the oldest transmitter
in
memory.
NOTE:
This system has
PTN
- Programmed Transmitter Notification. Each time the
ignition is turned ON,
the LED
will
flash the number of transmitters programmed to
the system.
Manual
Feature
Programming - Feature Bank 2 - 5
1.
Turn the ignition ON.
2.
Press and hold the valet/override button.
3.
Within 1
0 seconds the system
will
chirp
(3)
three times.
4.
Use the valet/override button to advance through each option bank. For
feature programming advance to Feature Bank
2,
3,
4 or
5,
which is
(4)
four,
(5)
five, (6) six and (7) seven chirps.
5.
Use the transmitter
0
button to
scroll through the selections
in
each feature
bank, the system
will chirp to match the feature number.
6.
Press the transmitter
@
button to change the desired feature. The LED
will
flash indicating the changed feature.
Defaulting All Features:
Pressing the
@
button anytime while
in
any of the
feature banks
will
default
all
features and return you to feature bank 2
- 4 chirps.
NOTE:
The system
will
remain
in
feature programming mode as
long
as the
ignition is on, there is no time limit.
To
exit programming turn the
IGNITION
OFF.
ca5153
I
5153sst rev A
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

Comments to this Manuals

No comments