Code Alarm SRT 6700 Service Manual download pdf (Page 13)

To Set Energy Saving Times Real Time Clock Functions (If Present) • 7

6.2. To Set Energy Saving

Times

6.3. To Set Timed Defrost

Parameters

ILE Energy Saving cycle

start during

workdays

(0 to 23 h 50 min)

During the Energy Sav-

ing cycle, the setpoint

is increased by the val-

ue in HES so that the

operation setpoint is

SET + HES.

dLE Energy Saving cycle

length during

workdays

(0 to 24 h 00 min) Sets

the duration of the En-

ergy Saving cycle on

workdays.

ISE Energy Saving cycle

start on holidays

(0 to 23h 50 min)

dSE Energy Saving cycle

length on holidays

(0 o 24h 00 min)

HES Temperature

increase during the

Energy

Saving cycle

(-30 to 30°C/ -54 to

54°F) Sets the increas-

ing value of the set-

point during the Energy

Saving cycle.

Table 6-2 - Energy Saving Times Parameters

Ld1

Ld6

Workday

defrost start

(0 to 23h 50 min) These param-

eters set the beginning of the

eight programmable defrost cy-

cles during workdays. For ex-

ample, when Ld2=12.4, the

second defrost starts at 12.40

during workdays.

Sd1

Sd6

Holiday

defrost start

(0 to 23h 50 min) These param-

eters set the beginning of the

eight programmable defrost cy-

cles during holidays. For exam-

ple, when Sd2=3.4, the second

defrost starts at 3.40 on holi-

days.

Table 6-3 - Timed Defrost Parameters

NOTE: To disable a defrost cycle, set it to nu

(not used). For example, if Ld6=nu, the sixth

defrost cycle is disabled.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 53 54

Comments to this Manuals

No comments

Code Alarm SRT 6700 Service Manual Page 13

Comments to this Manuals

Related products and manuals for Car alarm Code Alarm SRT 6700