Code Alarm DM 1500 Setup Guide download pdf (Page 72)

BX2

Write Once Options

Reset write once rec.

Allow user reset

Minimum low disk

On disk full

Write once last reset at

Reset

Disabled

20% 0064GB

Overwrite

26/May/2005 09:48

Press MENU/MODE when done

Reset Write Once Record

This will reset the earliest ‘Write Once’ record time and date to the current time and date. This is necessary when

archiving has been successful and the process is to restart.

To reset the Write Once record option, hold down the Camera 1 button for 5 seconds.

Allow User Reset

This option will enable an Operator menu which will allow the operator to reset the Write Once record option.

This is can be accessed from the ‘Copy Images’ screen as a submenu.

Minimum Low Disk

This sets the minimum percentage disk space available. If the Write Once storage drops below this minimum

setting, an alarm is triggered (warning will be displayed on the main monitor) which will be cleared once more

disk space becomes available.

Note: This option is a percentage of the overall hard disk of the unit, the equivalent in Gigabytes will be

automatically calculated and displayed.

On Disk Full

This option determines what action the unit will take when the disks become full. The options are;

• Overwrite - By default, the unit will overwrite the recorded images on the hard disk. A warning will

also be displayed to inform the Operator that the disk is full.

• Stop Recording - The unit will stop recording. A warning will also be displayed.

Write Once Last Reset

This displays the time and date the Write Once process was last reset.

Schedule Rates

This option is enabled by default. With ‘Schedule Rates’ enabled, the unit provides the option to congure

record rates for day, night and weekend operating mode in the ‘Standard Record Schedule’ and ‘Variable Record

Schedule’ menu. Disabling this option will switch the scheduled recording options to a single set of rates to be

used in all schedule (day, night, weekend) operation modes.

Local 4CI4 Interlace

The paramter ‘Local 4C1F Interlace’ can be switched On if the system will be used to record using the 4C1F

settings. This will eliminate the comb effect that may be visible in a high motion recording environment. It is not

required if the unit is not utilizing 4C1F, it may also not be required if not reading high motion.

1 ... 71 72 73 ... 97

No comments

Code Alarm DM 1500 Setup Guide Page 72