Code Alarm CA680 User Manual download pdf (Page 19)

Press DISARM:

1. Doors unlock.

2. Factory alarm (if equipped) is turned off.

3. Siren/horn sounds once/ parking lights flash once.

4. Courtesy lights turn on for 30 seconds, or until ARM is pressed or ignition is turned on.

5. Vehicle starter is enabled.

Press DISARM twice:

Passenger doors unlock if using 2-stage unlock.

Press CAR FIND/PANIC:

Siren/horn sounds 5 times.

Press and hold CAR FIND/PANIC for 2 seconds:

Siren/horn sounds and lights flash for 30 seconds or until any remote control button is pressed.

Press and hold UNLOCK:

Trunk or hatch opens, or other device activates.

If the Ignition Controlled Locks option is set to On:

Doors lock when all doors are closed and the ignition is turned ON.

Doors unlock when ignition is turned OFF.

6. System Testing Cont.

7. Mounting the Module / Finishing the Installation

1. Attach the module to the module mounting clip.

2. Mount the module to a brace or wire harness under the dash. The module and harnesses must be clear of

moving parts.

Installation Complete.

1 2 ... 14 15 16 17 18 19 20 21 22

No comments

Code Alarm CA680 User Manual Page 19