5 - Voltage Level: The voltage variance for remote start when set to tachless.
(see tach mode)
HIGH
-The
variance
in
battery voltage from before the remote start
is activated to after the engine is running must be greater than 0.5 volts.
LOW-
The variance
in
battery voltage from before the remote start
is activated to after the engine is running may be less than 0.5 volts.
6-
Crank
Time: Preset output times for the PURPLE starter wire.
1 Second 0.8 Seconds 1.5 Seconds 2 Seconds 4 Seconds
7 -
Crank
Average I
Crank
Time: The length of time
in
which the remote start
will crank the vehicle's starter.
Crank Average - Determines crank time by averaging the last 8 times the
vehicle was started with the key.
Preset Time - Preset starter output time. (see crank time)
8 - Gas I Diesel: Selects engine type and delay time for the starter output wire
during remote start activation.
Gas - Gasoline engine, no delay for the starter output wire.
1 0 Second Delay - Diesel engine, delays the starter output wire for 1 0
seconds after the ignition has been powered up by the remote start.
15 Second Delay - Diesel engine, delays the starter output wire for 15
seconds after the ignition has been powered up by the remote start.
20 Second Delay - Diesel engine, delays the starter output wire for 20
seconds after the ignition has been powered up by the remote start.
45 Second Delay - Diesel engine, delays the starter output wire for 45
seconds after the ignition has been powered up by the remote start.
9 -
Single
I
Double
Pulse Start: Switches the remote start activation between
a single or double press from the transmitter.
10 - IGN 2
Output:
Programmable high current output.
Ignition 2 - Ignition output during remote start.
Accessory - Accessory output during remote start.
Start
I Crank - Crank output during remote start.
11
- 2
or
3
Hour
Start: Not available on this model.
2012 Audiovox Electronics Corporation.
All
rights reserved.
23
Comments to this Manuals