Code Alarm ca5553sst User Manual Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 49
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
User
Programmable
Run
Time I
Run
Time
Extension
The system has the ability to allow the user to extend the time the vehicle will
be
running under control of the remote start. This will only extend the run time back to
the current run time setting during the current remote start cycle. If your system is
set to run 15 minutes and the time remaining is 4 minutes, extending the run time
will reset the countdown timer to 15 minutes and your vehicle will continue to run
for another 15 minutes. Follow the steps below to extend the vehicle's run time.
1.
The remote start must already be active.
2.
Press and release the 0 button 4 times.
3.
The system will chirp 1 time and flash the parking lights 4 times to
confirm that the run time has been reset.
Using
the
"Quick-stop"
Feature
-
Automatic
Transmission
Vehicles
If you want to make a short stop and keep your vehicle running (to keep the
interior warm or cool), the quick-stop feature allows you to do this while keeping
your vehicle secure and your keys with you.
To
engage
quick
stop:
1.
Stop the vehicle and place the transmission
in
PARK.
2.
With your foot off the brake pedal, press and release the 0 button 2
times within 2 seconds. The LED will flash 3 times to confirm quick
stop is entered.
3.
Remove the keys from the ignition and exit the vehicle. Press the
@ button to lock the vehicle's doors if desired.
Note: Do not leave children or animals unattended
in
the vehicle when using the
quick-stop feature.
Operating
the
Daily
Start
Timer
The system has the ability to start your vehicle based on a 24-hour countdown
timer. This feature requires a two-part activation sequence. From the remote,
pressing both the
@ & 0 buttons together will activate the 24 hour countdown
timer (the vehicle will start 24 hours from this time). Next, When you are finished
operating the vehicle for the day, perform the following steps to complete the
process.
1.
Turn the ignition ON/OFF (vehicle must
be
disarmed).
2.
Within 10 seconds, while pressing the brake, press and release the 0
button twice.
3.
The vehicle will emit 2 chirps and flash the parking lights 4 times.
2012 Audiovox Electronics Corporation.
All
rights reserved.
7
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 48 49

Comments to this Manuals

No comments