Code Alarm SRT 5500 Specifications download pdf (Page 43)

December 2013

REQUEST FOR PROPOSALS FOR

PURCHASE AND DELIVERY OF HEAVY-DUTY BUSES

RFP SRTA-2014-01

TECHNICAL SPECIFICATIONS

PAGE-43



c. A modesty panel of approximately thirty-four inches (34") in height shall be installed

within the handrail area of the rear side of the front stepwell. This panel shall have

adequate clearance from the front door, to prevent injury to passenger's hand(s) during

the opening cycle. The upper section of the front door modesty panel shall be

constructed of 3/8” thick 14” Graylite (dark tint) Lexan.



d. A modesty panel of approximately thirty-four inches (34") in height will be installed within

the handrail area of the rear side of the rear stepwell.



e. All modesty panels shall be raised three inches (3") above floor level.



19.3 Driver's Barrier



a. A full height barrier beginning 6 inches above the floor shall be provided directly in back

of the driver's station to separate the driver from the passenger compartment. The barrier

shall extend from the left side coach wall to the stanchion at the right rear of the driver's

station and then wrap around the side of the driver's seat. This panel shall in no way

interfere with the safe normal operation of the coach or restrict movement of the driver's

seat.



b. The manufacturer will be responsible for the purchase and installation of a SRTA

designed schedule rack on the rear facing side of the Driver’s barrier.



19.4 Interior Trim



a. Interior panels shall be applied to ensure a neat and finished appearance. Fasteners

shall be of such type that they will not loosen because of vibration. Panels shall be

supported so as to prevent buckles, drumming, or flexing when the vehicle is in service.

All panel joints shall be sealed and covered with protective trim strips to guard against

sharp edges. All interior ledges shall be angled so as to prevent any unwanted storage of

materials.



b. Ceiling trim panels shall be Melamine, Melamine bonded to aluminum one-tenth inch

(1/10") minimum thickness. Color shall be complementary to the interior of coach. Color

shall be Wilson Art Frosty White 1573-1.



c. Sidewall trim/panels below the windows shall be Melamine, 1/10 inch minimum

thickness. Color for the lower sidewall panels shall be Nepal Teak, with paneling grain

running horizontally.



d. Window mullions shall be Melamine, 1/10 inch minimum thickness applied in sections

with trim strips covering panel joints. Color for the window mullions shall be Wilson Art

Frosty White 1573-1 to match the ceiling panels.



e. All interior surfaces forward of the standee line shall be nonreflective black or a color

complementary to the interior of the coach.



f. Panel behind rear settee shall conform to the requirements of Federal Safety Standard

No. 302-Flammability of Interior Materials. The inside rear bulkhead panel shall be

covered with Melamine, 1/10 inch minimum thickness, color to be Nepal Teak. Such a

panel shall have an easily removable access door equipped with tamper proof captive

fasteners for servicing of the air conditioning/heater unit.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 86 87

Comments to this Manuals

No comments

Code Alarm SRT 5500 Specifications Page 43

Comments to this Manuals

Related products and manuals for Car alarm Code Alarm SRT 5500