Code Alarm SRT 5500 Specifications Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 87
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
December 2013
REQUEST FOR PROPOSALS FOR
PURCHASE AND DELIVERY OF HEAVY-DUTY BUSES
RFP SRTA-2014-01
TECHNICAL SPECIFICATIONS
PAGE-36
a. Floor shall be constructed of marine grade, seven (7) ply 3/4", Greenwood
Alkaline Copper Quat (ACQ) hardwood plywood, or approved equal.
b. The underside shall be primed with PPG Corashield 7972, or approved equal.
The cut edges shall be sealed with either white lead, liquid neoprene, liquid
urethane, Tuffcote, or Dolchem 606 or approved equal.
c. Floor shall be laid in such a manner as to be free from squeaks. All edges shall
be over underframe members.
d. Floor shall be reasonably level throughout and all joints between the floor and
vertical surfaces shall have a cove molding.
e. Plywood shall be securely bolted to frame members. Self-tapping screws may be
used.
f. Underframe shall be stiff enough to prevent floor from excessive flexing under
normal loads. The floor shall be supported so that when a person of 150 pounds
or more steps on any area, there will be no discernible flexing or movement.
g. The area at the farebox shall be of adequate strength to support the farebox
safely and durably.
h. The entire wooden floor shall be thoroughly sanded in preparation for application
of floor covering material.
15.7 Roof
a. Roof shall be an one piece fiber reinforced plastic (FRP) sheet constructed in
accordance with the manufacturer's standard and of sufficient strength and
stiffness to prevent vibration, drumming or flexing in service.
b. A rear roof hatch shall be provided to meet the requirements of FMVSS 217.
c. All seams, joints and overlapping panels, shall be thoroughly sealed to prevent
the entry of water and dust. Where dissimilar metals meet, proper care shall be
taken to prevent electrolytic corrosion.
15.8 Stepwells
The entrance and exit floor areas are to be sloped to prevent accumulation of water or
ice.
15.9 Wheelhouse
Wheelhouses shall be of sturdy construction, manufactured of fiberglass, providing
ample clearance at front and rear tires under load and under all positions of front wheel
steering.
15.10 Fenders
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 86 87

Comments to this Manuals

No comments