Code Alarm SRT 5500 Specifications download pdf (Page 41)

December 2013

REQUEST FOR PROPOSALS FOR

PURCHASE AND DELIVERY OF HEAVY-DUTY BUSES

RFP SRTA-2014-01

TECHNICAL SPECIFICATIONS

PAGE-41



17.3 Door Controls and Interlocks



a. Both front and rear doors shall be controlled by a five (5) position door operating control,

with the following positions:



-Front door open - rear door unlocked

-Front door open

-Both doors closed

-Rear door unlocked

-Rear door unlocked - front door open.



This control shall be located on the console to the left of the operator.



b. A brake and accelerator interlock shall be provided that prevents movement of the coach

when the rear doors are open. The interlock equipment shall be mounted together as one

assembly.



c. A rear door override lever shall be provided for emergency exit. The lever shall be

located in the rear, door control, compartment. The lever is used to release the rear door

from the locked position for manual operation and also shall engage the interlock.



d. A master interlock override switch shall be provided. It shall be located in the electric

panel near the driver and shall be in a secure position. Location to be approved by the

SRTA.



17.4 Door Glass



Each section of the door shall be glazed with one-quarter-inch (l/4") nominal laminated

glass.



18. EXTERIOR MIRRORS



18.1 General



Coaches shall be equipped with two (2) mirrors, one (1) mounted on the roadside front

corner post and one (1) mounted on the curbside front corner post. Roadside mirror just

above lower edge of driver's roadside window. Curbside mirror is not to extend further

than a twelve inch (12") radius from the corner of coach and shall be mounted on the

curbside front corner post.



18.2 Curbside and Roadside Mirrors



a. Mirrors shall be a remote adjustable B&R Model 910/911R with all metal hardware, or

approved equal. The controls shall be located to the roadside of the driver and

provide for a full range of adjustment of the mirrors. The glass shall be easily

replaceable and be secured with Velcro. The mirrors section shall be with 9-1/2" wide

by 11-1/2" high mirror glass.



b. The driver's side glass shall be flat. The curb side shall be split with a lower convex

mirror of no less than 2-1/2" in height.



c. All hardware utilized for the exterior mirrors shall be stainless steel.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 86 87

Comments to this Manuals

No comments

Code Alarm SRT 5500 Specifications Page 41

Comments to this Manuals

Related products and manuals for Car alarm Code Alarm SRT 5500